The materials used are as follows
The red-colored materials are non-changeable
Recommended Use:
Office, Residential
Door Placement:
Single Door, Two Adjacent Doors
Elevator Cab Positioning
Sill
Cabin Decor
Laser Pattern
Flooring
Stone
Walls
Stainless Steel
Ceiling
Stainless Steel
Lighting
SMD
Recommended Use:
Office, Residential
Door Placement:
Single Door, Two Adjacent Doors
The Materials Used Are As Follows
The red-colored materials are non-changeable
Elevator Cab Positioning
Sill
Flooring
Stone
Ceiling
Stainless Steel
Lighting
SMD
Walls
Stainless Steel
Decor
Laser Pattern
Play Video
Intended Use of Elevator Cabin
One of the key elements in modern interior architecture is shapes, which are often derived from simple geometric forms such as rectangles, triangles, and grid patterns. One of the main design features of the G01 elevator cabin is the use of geometric patterns and motifs, allowing for personalization based on the individual’s taste and the elements used in the building. Another important aspect of the cabin’s design is the contrast between black and white colors, with shades of gray and silver being suggested as the top choices. While the primary usage of this design is for office and formal buildings, which have a large number of enthusiasts in this category, the cabin can also be utilized for residential, commercial, and hotel buildings.
The Material Used For Constructing The Cabin
In addition to single-door configurations, it will be possible to use two adjacent doors in this cabin, and if there is a need for double telescopic doors, you can opt for the G01 300 series. In fact, the G01 is one of the few cabin designs that can be compatible with any type of door of your choice.
The Type Of Elevator Cabin Door
The main component that constructs this elevator cabin is mirror stainless steel, which reflects the patterns on the side panels and ceiling of the cabin, providing a special effect. These stainless steel sheets are imported and made of 304 grade, with a thickness of 0.7 mm. The sheet used in the front panel, which is laser-cut with geometric patterns, is made of iron to maintain its beauty, delicacy, and quality during cutting and even after use, ensuring greater strength.
Free consultation and design of your elevator cabin
We will design your elevator cabin completely free of charge. Contact the following numbers for advice
(+9821) 09129674102 91091200
