Lava Elevator Cabin

The materials used are as follows

Recommended Use:

Residential, office

Door Placement:

Two adjacent doors, single door, two opposite doors

Elevator Cab Positioning

Stainless Steel

Cabin Decor

stone

Flooring

stone

Walls

Aluminum

Ceiling

Stainless Steel

Lighting

Spot

Lava Elevator Cabin

Recommended Use:

Residential, office

Door Placement:

Two adjacent doors, single door, two opposite doors

The Materials Used Are As Follows

Elevator Cab Positioning

Stainless Steel

Flooring

stone

Ceiling

Stainless Steel

Lighting

Spot

Walls

Aluminum

Decor

stone

Intended Use of Elevator Cabin

Since ancient times, stone, as a material inspired by nature, has always been of interest to architects. Due to its unique characteristics, including beauty, durability, and diversity, it has been used in structural design. Even today, we witness the combination of natural and artificial stones alongside other modern materials in architecture.

The Material Used For Constructing The Cabin

Natanz Black Granite, exclusive General Cabin matte black profiles, 1mm thick smoked mirror stainless steel ceiling with Super 8K resolution, exclusive General Cabin stones, 6mm silver mirror, smoked mirror stainless steel side panels of the cabin door (non-magnetic) with 1mm thickness and Super 8K resolution.

The Type Of Elevator Cabin Door

The height of the door is proportional to its width. For instance, if the entrance width is 80 cm, the recommended effective height should be 210 cm. Similarly, for different widths, corresponding effective heights should be considered. The positioning of the cabin and floor doors should ensure the creation of side panels (nose) on both sides of the cabin door, with an appropriate size. The term “appropriate size” refers to a minimum width of 15 cm.

Free consultation and design of your elevator cabin

We will design your elevator cabin completely free of charge. Contact the following numbers for advice

(+9821) 09129674102 91091200